Five-stand Cold Continuous Rolling Mill Unit

Five-stand Cold Continuous Rolling Mill Unit

Unit NameTechncial Specification 1250 pickling continuous cold rolling mill unit 1420 pickling continuous cold rolling mill unit 1450 pickling continuous cold rolling mill unit 1550 pickling continuous cold rolling mill unit 1780 pickling continuous cold rolling mill unit Form Six-stand continuous rolling Six-stand continuous rolling Five-stand continuous rolling Five-stand continuous rolling Five-stand continuous rolling Nominal capacity 870,000 tons / year ...


  • Automatic rolling up, threading, drifting and waste cutting and treatment at inlet section of the pickling unit:
  • Automatic laser welding machine is available at inlet section of the pickling line. :
  • Three loops for closed loop drive of wire ropes are available for the unit, and the loop car can walk freely without strip steel.:
  • A two-bend and one-leveling tension leveler is provided at the pickling process section, which is subjected to shallow tank turbulent pickling.:
  • Turret-style disc shear is available at the pickling outlet, and two correction devices are provided at the disc shear inlet to ensure edge cutting accuracy.:
  • The rolling mill is a five-stand full six-roll continuous cold rolling mill, with the function of positive and negative bending roller function with working roll, positive bending roller of intermediate roll, traverse movement of intermediate roll and automatic adjustment of rolling line elevation by wedge, as well as stand drifting rolling and dead zone control of S5 rolling mill working roll bending roller. Automatic control of rolling mill hydraulic roll seam, roll seam presetting, pressing and tilting control, rolling force control, single-side rolling force control, AGC gain adaptation, rolling mill eccentric compensation, acceleration compensation of inlet tension roller, rolling mill stiffness correction and plastic stiffness correction of rolled piece and various compensation function. S1 and S5 stand hydraulic roll seam is provided with the function of feed-forward control and feedback control. The tension roller in front of the stand is controlled as No. 0 stand to adjust S1 mill roll gap.:
  • Carrousel coiler is adopted by the unit.:
  • The rolling mill and coiler are subject to AC centralized transmission. Quick roll change of working roll and intermediate roll.:
  • The back-up roll bearings are lubricated with thin oil, and the working roll and intermediate roll bearings are lubricated with dry oil.:
  • The rolling mill is provided with the functions of broken belt protection, accident alarm and accurate stop of working roll, automatic sleeve mounting and dynamic specification change.:
  • Unit NameTechncial Specification

    1250 pickling continuous cold rolling mill unit

    1420 pickling continuous cold rolling mill unit

    1450 pickling continuous cold rolling mill unit

    1550 pickling continuous cold rolling mill unit

    1780 pickling continuous cold rolling mill unit

    Form

    Six-stand continuous rolling

    Six-stand continuous rolling

    Five-stand continuous rolling

    Five-stand continuous rolling

    Five-stand continuous rolling

    Nominal capacity

    870,000 tons / year

    1,000,000 tons / year

    600,000 tons / year

    1,100,000 tons / year

    1,500,000 tons / year

    Maximum rolling speed

    1700 m/min

    1700 m/min

    400 m/min

    1350 m/min

    1350 m/min

    Rolled material

    Material

    CQ, DQ, HSS

    CQ, DQ, HSS

    Stainless steel

    Hot-rolled low carbon steel, ultra low carbon steel, etc.

    Q195, Q235, 45#

    Plate thickness (in/out)

    2.0-4.5/0.18-2.0mm

    2.0-4.5/0.18-2.0mm

    2. 0-6.0/0.2-2.0mm

    2. 0-6.0/0.3-3.0mm

    Plate thickness

    700-1100mm

    700-1300mm

    750-1320mm

    750-1430mm

    800-1630mm

    Coiler weight

    22t

    25t

    28t

    28.6t

    30t

    Rolling pressure

    18MN

    20MN

    20MN

    22MN

    25MN

  • WhatsApp Online Chat !