Spare Parts

It is widely used for power transmission of metallurgical equipment.
·High transmission efficiency, large inclination and low running noise;
·High dynamic balance accuracy, up to G16～G6.3;
·The product structure has been optimized for several times, and is easy to install and maintain;
·Strict control of the product manufacturing process to ensure reliable quality;
·The company has hosted/participated in the development of industry standards (2 national standards, 4 industry standards);
·Recommended standard products of Taier to meet customer needs;

It is mainly used in the main drive of cold-rolled sheet production line.
·High-load carrying capacity and large transmission torque;
·Optional high-precision matching spline pair;
·High dynamic balance accuracy, up to G6.3;
·High transmission efficiency, up to 98.7%-99.9%;
·The product structure has been optimized for several times, and is easy to install and maintain;
·Strict control of the product manufacturing process to ensure reliable quality;
·The company has hosted/participated in the development of industry standards (1 national standard, 1 industry standards);
·Recommended standard products of Taier to meet customer needs;

It is mainly used in the main drive of hot-rolled sheet, steel pipe and section steel production line rolling mill.
·High carrying capacity to simultaneously meet the requirements of transmitting large torque and large inclination;
·Optional high-precision matching spline pair module;
·High transmission efficiency, up to 98.7%-99.9%;
·The product structure has been optimized for several times, and is easy to install and maintain;
·Strict control of the product manufacturing process to ensure reliable quality;
·The company has hosted/participated in the development of industry standards (2 national standards, 2 industry standards);
·Recommended standard products of Taier to meet customer needs;

It is mainly used in the main drive of hot-rolled sheet, section steel and steel pipe production line.
·High carrying capacity to meet the requirements of transmitting large torque and large inclination;
·Optional high-precision matching spline pair module;
·High transmission efficiency, up to 98.7%-99.9%;
·The product structure has been optimized for several times, and is easy to install and maintain;
·Strict control of the product manufacturing process to ensure reliable quality;
·The company has hosted/participated in the development of 1 industry standard;
·Recommended standard products of Taier to meet customer needs;

It is widely used for power transmission of metallurgical equipment.
·Optimized tooth profile parameters, and the carrying capacity is increased by 15~20% compared with similar products in the market;
·TG series of Taier’s standard products have high universality, fully covering all specifications of 11 standard series of GIICL, GIICLZ, GCLD, NGCL, NGCLZ, WG, WGP, WGT, WGZ, WGC, WGJ;
·Large angular displacement of input and output shafts is allowed, ±1.5° for general design and ±5° for special design;
·Strict control of the product manufacturing process to ensure reliable quality;
·The company has hosted/participated in the development of 1 industry standard;
·Recommended standard products of Taier to meet customer needs;

It is mainly used in main drive of the hot-rolled sheet production line rolling mill.
·Dual positioning of tooth side and tooth top for more stable operation of the coupling;
·Optimized seal design to prevent loss of lubricating grease, and achieve long-term full lubrication of the engaging tooth surface;
·Strict control of the product manufacturing process to ensure reliable quality;
·The company has hosted/participated in the development of 1 industry standard;
·Recommended standard products of Taier to meet customer needs;

It is mainly used in main drive of the bar and wire rod mill.
·High-precision matching spline pair for smoother sliding;
·Gear pair top positioning for smooth operation;
·Optional phase-adjustable module;
·Strict control of the product manufacturing process to ensure reliable quality;
·The company has hosted/participated in the development of 1 industry standard;
·Recommended standard products of Taier to meet customer needs;

It is mainly used in main drive of hot-rolled sheet production line finishing rolling unit.
·China’s first internal circulation forced thin oil lubrication technology, the industry leader;
·Double-seal construction to ensure longer service life of the coupling shaft;
·High-hardness gear pair for bigger load carrying torque;
·Strict control of the product manufacturing process to ensure reliable quality;
·The company has hosted/participated in the development of national/industry standards (1 national standard, 3 industry standards);
·Recommended standard products of Taier to meet customer needs;

Suitable for long-time coiling;
Guarantee clear oil passage in the mandrel through cooling of the main shaft;
Avoid impact on the mandrel grease system caused by coil seizing, etc.

Suitable for long-time coiling;
Excellent cooling result for segment to improve its service life;
Excellent mandrel stability; long-time coiling.

Higher coiling capacity of the mandrel;
The mandrel is suitable for large tension coiling and coiling of pipeline steel of X80, X100, X120

Higher coiling capacity of the mandrel;
The distributors and pipe accessories are imported components, and the lubrication is well maintained;

It is widely used in the decoiler of the production lines, such as flattening, pickling, reversible rolling and recoiling; it is also used in the recoiler with small tension like galvanizing line.
·Simple structure, short manufacturing lead time;
·Easy to disassemble and maintain;

It is widely used in the recoiler of cold rolling production line such as the reversing mill and SENDZIMIR cold rolling mill; it is also used in the decoiler with higher tension requirements such as leveling line.
·Good rigidity, suitable for large tension coiling;
·Axial or radial hydraulic jaw may be provided on the segment;

It is widely used in the recoiler of the production line such as galvanizing and recoiling and Carrousel recoiler.
·Good strength of mandrel main shaft;
·The axial wedge of mandrel is usually made of cast copper, with good friction performance of the sliding surface;

It is widely used in the recoiler of the production lines such as flattening and straightening.
No gap between adjacent segment when the mandrel is in a perfect circle.
Pre-loaded springs are installed in the segment to ensure that it is not loosened.

Mainly used in hot continuous rolling and CSP production lines
High hardness, strength and toughness at high temperature
Excellent thermal stability and thermal Fatigue Performance
Good hardenability for repeated grinding

Mainly used in the plate mill of 2800, 4300, etc.
High strength, high hardness and high toughness
Good hardenability for repeated grinding

Mainly used in the production lines of cold rolling, continuous annealing, pickling, galvanizing, etc.
High wear resistance and toughness
Good hardenability for repeated grinding
Suitable for multi-steel grade product cutting

It is installed on both sides of the work roll bearing chock for protection purpose.
·The wear layer and the base plate are subject to chemical and metallurgical bond, with high bonding strength;
·The welding material and wear layer thickness can be flexibly selected according to different working conditions, and the wear layer thickness of finished products is not less than 2mm;

It is installed on both sides of the back up roll bearing chock for protection purpose.
·The wear layer and the base plate are subject to chemical and metallurgical bond, with high bonding strength;
·The welding material and wear layer thickness can be flexibly selected according to different working conditions, and the wear layer thickness of finished products is not less than 2mm;

It is installed on both sides of the back up roll bearing chock of the mill stand for protection purpose.
·The wearing layer and the base plate are subject to chemical and metallurgical bond, with high bonding strength;
·The welding material and wear layer thickness can be flexibly selected according to different working conditions, and the wear layer thickness of finished products is not less than 2mm;