kayan aiki kawota

An yafi amfani ga atomatik nauyin da metallurgical high-gudun waya nada, za a iya damfara da nada rataye a kan C-ƙugiya da kuma ta atomatik kunsa da dam da nada tare da taye waya a lokaci guda.

Kayan aiki sigogi:

An yafi amfani ga atomatik strapping na bakin karfe da kuma sauran kayayyakin kula surface karce.

Kayan aiki sigogi:

Kayan aiki sigogi:

An yafi amfani da a tsaye pallet kai tsarin da kuma bautar wani karamin yanki.

Kayan aiki sigogi:

Ana amfani da tying daure na zagaye sanda, sake-mashaya, lebur karfe da kuma kwana karfe.

A bundling inji aka shigar a wani ajali matsayin kusa da nadi tebur, da kuma mashaya cuta ya wuce ta rufaffiyar waya hanya tsarin lokacin da wucewa da abin nadi tebur.

Features :

high aMINCI

twist head and guide system

knot push down 

Full-atomatik iko

Kayan aiki sigogi:

Ana amfani da tying daure na zagaye sanda, sake-mashaya, lebur karfe da kuma kwana karfe.

A bundling inji aka shigar a wani ajali matsayin kusa da nadi tebur, da kuma mashaya cuta ya wuce ta rufaffiyar waya hanya tsarin lokacin da wucewa da abin nadi tebur.

Features:

high aMINCI

double turn twist head and guide system

knot push down

Atomatik guda da kuma biyu Tuddan yanayin sharuddan sauyawa

Full-atomatik iko

Kayan aiki sigogi:

high aMINCI

An yafi amfani ga cikakken-atomatik bundling na aluminum mashaya da kuma sauran kayayyakin kula surface karce.

Kayan aiki sigogi:

Ana amfani don kammala bundling na square daure

A bundling inji aka saka a wani ajali matsayi a kan abin nadi tebur, da kuma mashaya daure ratsa cikin nadi tebur da kuma wuce ta cikin rufaffiyar rariya tsarin na bundling na'ura.

Features:

Top orientation, offset to corner twist head

Water drop shape tie wire guide

Anti-karce nadi tsari

Kayan aiki sigogi:

1) Gaza nada circumferential strapping inji - gefen strapping (guda shugaban / biyu kai)

● Installed a coiler kanti ko da matsayi inda tsiri nada shugabanci ne guda a matsayin isar shugabanci

● M tsiri nada nisa: 550 ~ 2000mm

● M tsiri nada m diamita: 900 ~ 2250mm

● Strapping yanayin: 1 ~ 3 guda / 1 ~ 5 waƙoƙi

2) Gaza nada circumferential strapping inji - saman strapping 

● shigar a kan kai line inda tsiri nada shugabanci ne perpendicular zuwa isar shugabanci

● M tsiri nada nisa: 550 ~ 2000mm

● M tsiri nada m diamita: 900 ~ 2250mm

● Strapping yanayin: 1 ~ 5 waƙoƙi

3) Long samfurin strapping inji - saman strapping

● Dace online bundling na sashen karfe, karfe bututu, mashaya, da dai sauransu

● M tari fadin: 150 ~ 550mm

● M tari tsawo: 150 ~ 600mm

● tela sanya injiniya ne akwai.

Shigar a kan kai line inda tsiri nada shugabanci ne guda a matsayin isar shugabanci

M tsiri nada nisa: 550 ~ 1800mm

M tsiri nada m diamita: 900 ~ 2000mm

M tsiri nada ciki diamita:> 740mm

Strapping yanayin: 1 hanya

Shigar a coiler kanti ko da matsayi inda tsiri nada shugabanci ne guda a matsayin isar shugabanci

M tsiri nada nisa: 950-2350mm

M tsiri nada m diamita: 900-2650mm

Strapping yanayi: 1-5 waƙoƙi

Shigar a kan kai line inda tsiri nada shugabanci ne guda a matsayin isar shugabanci

M tsiri nada nisa: 550 ~ 1800mm

M tsiri nada m diamita: 900 ~ 2000mm

M tsiri nada ciki diamita:> 740mm

Strapping yanayi: 1 hanya 

Sarrafawa ta ci-gaba mutummutumi, shi zai iya ci gaba da buga alamomi a farfajiya na sanyi-birgima da zafi-birgima tsiri coils da aka featured da musamman karfi inji kwanciyar hankali da kuma high-gudun fesa bugu.

A single-bututun ƙarfe tsiri nada spraying robot an yadu a yi amfani da yawa karfe Mills na shekaru masu yawa, kuma an tabbatar da cewa shi yana da sosai barga yi ko da a cikin mafi munin yanayi aiki.

A karkashin iko da robot, a hade tare da musamman Paint spraying bututun ƙarfe da zafi kariya na'urar, alama spraying za a iya yi a farfajiya na sanyi-birgima da zafi-birgima tsiri coils ta yin amfani da wadanda ba mai guba da kuma wadanda ba tarewa Paint. The lamba spraying inji za a iya amfani da su domin auna girman da karfe nada, fesa alamomi a farfajiya na tsiri nada a cikin wani nau'i na mike layin ko wani kwana, da kuma ƙila za a yi amfani da su fesa daya ko fiye Lines na alamomi a karshen fuskar nada a lokacin da ya cancanta. 

Features:

Full-atomatik bugu (alama)

M aiki tare da m mutummutumi

free programmable

Aikace-aikace na ba-mai guba, wadanda ba clogging Paint

Paint (tawada) matakin nuni da ƙararrawa

Easy shigar, dace data kasance da sabon samar Lines

Low  tabbatarwa ta halin kaka

 Kayan aiki sigogi:

Located a fara ƙarshen samar line kuma amfani ga unwinding da ya kumshe wadansu abubuwan tsiri.

• Amfani da cantilever irin mandrel.
• Mandrel fadada da kuma ƙanƙancewa kore ta Rotary na'ura mai aiki da karfin ruwa Silinda.
• Tare da CPC jeri aiki.
• A reducer ne lubricated tare da bakin ciki mai.

Located a karshen tsiri samar line kuma amfani ga Tuddan tsiri.

• Amfani da cantilever irin mandrel.
• Mandrel fadada da kuma ƙanƙancewa kore ta Rotary na'ura mai aiki da karfin ruwa Silinda.
• EPC baki ja ruwa coiling.
• A reducer ne lubricated tare da bakin ciki mai.